Your Partner For High Performance Super Floors
Professional, courteous and accommodating service is what you can expect from an industry leader. Well known for its pioneering spirit and commitment to quality, Concrete Finishes is backed by years of experience. Having installed countless square feet of floor finishes in all types of facilities.

Always the innovator, they have proven their leadership in the floor coatings industry by consistently offering products and services for the industrial and commercial sectors to enhance performance, reduce cost, minimize problems and promote a safe environment.

Performance, Profitability, Visual Effect
The most durable, multi-purpose, floor coating systems for plants and high traffic areas!

Concrete Finishes' coating systems are designed to protect floors from harsh environments subject to heavy traffic, including cars, trucks, tow motors and material carts. In addition to excellent abrasion resistance, these systems offer exceptional resistance to a wide range of chemicals and solvents.

Cleaning and Maintaining a Concrete Finishes' Flooring System
Every premise can be kept tidy with a minimal amount of work. All flooring systems are easy to clean and environment friendly cleaning compounds can be used. A soft soap and water mixture can be applied to the floor with a mop or washing apparatus. How often the floor needs to be cleaned is dependent on the type of activity in the facility. Normally a floor should be swept and cleaned every day to once a week. With regular cleaning and maintenance, you will lower the expense of cleaning compounds and articles of consumption.


DESCRIPTION:
Two component 100% solids epoxy coating system designed as a heavy duty re-surfacer that will fill cracks and superficial defects in concrete. In its cured state, it leaves a smooth non-porous high gloss finish that will withstand industrial chemicals, high abrasion and lift truck traffic.
 

COLORS:
All colors available
SHEEN:
 High gloss
VOLUME SOLIDS:
 100%
SOLVENTS:
 0%
WATER:
 0%
MIXED POT LIFE
 60 minutes
SHELF LIFE:
 3 year (Unmixed)
TENSILE STRENGTH:
 6,830 PSI.
FLEXURAL STRENGTH:
 11,400 PSI.
COMPRESSIVE STRENGTH:
 14,825 PSI.
DRYING TIME:
 16 hours (Light traffic)
FULLY CURED:
 7 days
MIL THICKNESS:
 20 mil two coats
ADHESION:
1,500psi- concrete failure


CHEMICAL RESISTANCE (Immersion):
Reagent
3 Hours
24 Hours
3 Days
7 Days
28 Days
Deionized Water
Excellent
Excellent
Excellent
Excellent
Excellent
Oils / Salts / Cutting Fluids
Excellent
Excellent
Excellent
Excellent
Excellent
Ethanol
Moderate
Moderate
Moderate
Moderate
Moderate
MEK
Excellent
Good
Good
Moderate
Poor
10% Lactic Acid
Good
Good
Moderate
Moderate
Poor
10% Acetic Acid
Good
Good
Moderate
Moderate
Poor
10% Sulfuric Acid
Excellent
Excellent
Excellent
Good
Good
70% Sulfuric Acid
Excellent
Excellent
Excellent
Good
Good
50% Sodium Hydroxide
Excellent
Excellent
Excellent
Excellent
Excellent
10% Sodium Hypochlorite
Excellent
Excellent
Excellent
Excellent
Excellent


ABRASION TESTING:
Two component 100% solids epoxy coating system tested by an independent lab for abrasion resistance relative to four concrete floor coatings. Each coating was applied by a 5 mm pile roller in two coats to smooth concrete stones and allowed to dry cure at room temperature. Abrasion tests were conducted at two intervals, at 48 hours and at 7 days from the time of the second coat application.

PROCEDURE:
Abrasion testing was performed on a standard Gardner-Style Scrub Tester, using diamond grit no. 220 wet abrasion paper, kept wet by periodic water spray and changed every 1000 cycles. Cycles to fail indicate the number of abrasive cycles to wear through the coating film and expose a minimum of one square inch of the concrete substrate.


ABRASION TEST RESULTS:

COATINGS
CYCLES TO FAIL
48 Hours cure
CYCLES TO FAIL
7 Days cure
Solvent Based Alkyd Floor Paint
48
128
Solvent Based Urethane
64
96
Two Part Water Based Epoxy
144
224
Two Part Solvent Based Epoxy
336
1,024
H.S.E. 2000 100% Solids Epoxy
5,912
6,992