warehouse2

Your Partner For High Performance Super Floors

Professional, courteous and accommodating service is what you can expect from an industry leader. Well known for its pioneering spirit and commitment to quality, Concrete Finishes is backed by years of experience. Having installed countless square feet of floor finishes in all types of facilities.

Always the innovator, they have proven their leadership in the floor coatings industry by consistently offering products and services for the industrial and commercial sectors to enhance performance, reduce cost, minimize problems and promote a safe environment.

Performance, Profitability, Visual Effect

The most durable, multi-purpose, floor coating systems for plants and high traffic areas!

Concrete Finishes’ coating systems are designed to protect floors from harsh environments subject to heavy traffic, including cars, trucks, tow motors and material carts. In addition to excellent abrasion resistance, these systems offer exceptional resistance to a wide range of chemicals and solvents.

Cleaning and Maintaining a Concrete Finishes’ Flooring System

Every premise can be kept tidy with a minimal amount of work. All flooring systems are easy to clean and environment friendly cleaning compounds can be used. A soft soap and water mixture can be applied to the floor with a mop or washing apparatus. How often the floor needs to be cleaned is dependent on the type of activity in the facility. Normally a floor should be swept and cleaned every day to once a week. With regular cleaning and maintenance, you will lower the expense of cleaning compounds and articles of consumption.

Description:

Two component 100% solids epoxy coating system designed as a heavy duty re-surfacer that will fill cracks and superficial defects in concrete. In its cured state, it leaves a smooth non-porous high gloss finish that will withstand industrial chemicals, high abrasion and lift truck traffic.

Colours All colours available
Sheen: High gloss
Volume Solids: 100%
Solvents: 0%
Water: 0%
Mixed Pot Life: 60 minutes
Shelf Life: 3 year (Unmixed)
Tensile Strength: 6830 PSI
Flexural Strength: 11400 PSI
Compressive Strenth: 14825 PSI
Drying Time: 16 hours (Light traffic)
Fully Cured: 7 days
Mil Thickness: 20 mil two coats
Adhesion: 1500psi – concrete failure

ambulance

warehouse3

Chemical Resistance (Immersion):

Reagent 3 Hours 24 Hours 3 Days 7 Days 28 Days
Deionized Water Excellent Excellent Excellent Excellent Excellent
Oils/Salts/Cutting Fluids Excellent Excellent Excellent Excellent Excellent
Ethanol Moderate Moderate Moderate Moderate Moderate
MEK Excellent Good Good Moderate Poor
10% Lactic Acid Good Good Moderate Moderate Poor
10% Acetic Acid Good Good Moderate Moderate Poor
10% Sulfuric Acid Excellent Excellent Excellent Good Good
70% Sulfuric Acid Excellent Excellent Excellent Good Good
50% Sodium Hydroxide Excellent Excellent Excellent Excellent Excellent
10% Sodium Hypochlorite Excellent Excellent Excellent Excellent Excellent

industrial1

Abrasion Testing:

Two component 100% solids epoxy coating system tested by an independent lab for abrasion resistance relative to four concrete floor coatings. Each coating was applied by a 5 mm pile roller in two coats to smooth concrete stones and allowed to dry cure at room temperature. Abrasion tests were conducted at two intervals, at 48 hours and at 7 days from the time of the second coat application.

Procedure:

Abrasion testing was performed on a standard Gardner-Style Scrub Tester, using diamond grit no. 220 wet abrasion paper, kept wet by periodic water spray and changed every 1000 cycles. Cycles to fail indicate the number of abrasive cycles to wear through the coating film and expose a minimum of one square inch of the concrete substrate.

Abrasion Test Results:

Coatings Cycles to Fail Cycles to Fail
48 Hours Cure 7 Days cure
Solvent Based Alkyd Floor Paint 48 128
Solvent Based Urethane 64 96
Two Part Water Based Epoxy 144 224
Two Part Solvent Based Epoxy 336 1024
H.S.E. 2000 100% Solids Epoxy 5912 6992